Sundown Audio SA-Classic 12" 750W Black Motor Subwoofer

Sundown AudioSKU: SW-SACL12D4

Price:
Sale price$269.99
Stock:
Available

Description

Here at Sundown Audio we take feedback from customers and dealers seriously. With the launch of the SA v.2 woofers we heard a lot of call to also keep the old version for lower depth / lower cost applications — so we did that via the “Classic” SA. Still available in 10s and 12s it is essentially the SA v.1 Rev.3 but with a black motor finish. We even squeezed in an upgrade… the motor is bolted together for enhanced long-term durability!

The Sundown SA series has been our most popular product line since the introduction of the SA-12 in 2009. It was the result of over a year of testing and prototyping until all of our goals and expectations were blown away. The SA series has continually evolved over the years thanks to extensive testing and feedback from our SPL competition Team and our customers but still stays true to its legendary design heritage. It has never failed to prove itself year-in and year-out in every application ranging from daily musical builds to all-out SPL competition vehicles.

When designing the SA series we started out with an FEA optimized motor & coil design capable of 19mm of one-way Klippel verified excursion and just over 33mm of x-mech. This motor & coil setup was then mated up to an extremely robust double-layer Nomex spider with fully tied-on “XL” tinsel leads (84-Strands of Conductor), an SPL competition grade paper cone, and a strong foam surround. The motor also features a large magnet ID shorting ring (faraday ring) to reduce distortion causes by inductance & inductance variation over stroke.

Features

  • Xmax = 19mm one-way by 70% BL
  • RMS Power = 750-watts
  • Vented magnetic gap
  • Optimized high-velocity pole vent
  • Innovative high-velocity vented frame spacer ring
  • Black Aluminum 2.5” voice coil former for superior heat dissipation
  • High Temperature copper voice coil wire
  • Large aluminum faraday ring (Magnet ID)
  • Spring Loaded Terminals
  • Stitched-On “XL” Tinsel Leads to prevent fatigue and failure
  • High strength cast aluminum frame
  • Optimized for small ported, sealed, & band-pass enclosures
  • These features combine to create the optimized coil ventilation system.

Specifications

T/S SPECS SA CLASSIC 12" D2 SA CLASSIC 12" D4
RE (Ohms) 4.57 7.07
FS (Hz) 33.71 33.96
VAS (L) 21.21 24.63
Qes 0.58 0.55
Qms 5.34 5.15
Qts 0.52 0.49
Le (mH) 3.40 4.84
BL (NA) 21.64 25.67
Mms (Grams) 280 237
Cms (uM/N) 79.43 92.27
Sens (dB @ 1w/1m) 83.21 84.22

Enclosure Specifications

SA CLASSIC 12"

Sealed Enclosure 1.0 cu ft
Ported Enclosure 1.75 cu ft
Recommended Tuning 35Hz
Recommended Port Area 26 sq in
Displacement 0.14 cu ft
Depth 6.5″
Outside Diameter 12.625″
Cut-Out 11.125″
Physical Dimensions Download

Enclosure Designs

Design schematic for a speaker enclosure tailored to the Sundown Audio SA-Classic 12" 750W Black Motor Subwoofer. The design includes dimensions, port size, cut sheet, and tuning frequency. It features the Bassahaulic Designs logo and contains a note advising double-checking due to potential errors. The artwork showcases a 3D rendering of a wooden enclosure featuring a circular cutout on one side, specifically crafted to accommodate Sundown Audio's SA-Classic 12" 750W Black Motor Subwoofer. This elegantly simple design highlights a natural wood finish, with the BASSAHOLIC DESIGNS logo subtly displayed in the bottom left corner. A 3D design of a wooden box with dimensions labeled in inches: 22 wide, 18 deep, and 14.5 high. It features a large circular cutout perfect for Sundown Audio's SA-Classic 12" 750W Black Motor Subwoofers and is marked with the logo Bassahaulic Designs at the bottom left. An illustration inspired by the Sundown Audio SA-Classic series shows a rectangular wooden board with a prominent circular cutout at its center. The dimensions are labeled as 11.34 inches wide by 7.34 inches high, and the circle has a diameter of 6.5 inches, featuring the Assahualto Design logo.
3D model of a wooden box with precise dimensions and cutouts, perfect for the Sundown Audio SA-Classic 12" 750W Black Motor Subwoofer. The front includes a circular cutout, and detailed measurements in blue text guide the construction. The SA series logo is subtly placed in the corner to maintain brand consistency. A layout diagram for cutting wood pieces includes two 23"x17" pieces for the top and bottom, two 17"x13" pieces for the sides, one 21.5"x13" piece for the back, along with pieces labeled Front Wall #1, Front, and Front Wall #2. These components are meticulously designed to perfectly accommodate a Sundown Audio SA-Classic 12" 750W Black Motor Subwoofer at the bottom right corner.
.Zip File

Specifications

Product Brand Sundown Audio
Coil Dual 4 Ohm (D4)   Dual 2 Ohm (D2)  
RMS Power 750W  
Diameter 12"  

You may also like

Recently viewed