D4800 XS Power 12VDC AGM Car Audio Vehicle Battery 3000A 60Ah Group 48

The search for a "Group 48 battery upgrade" or "H6 AGM battery for car audio" ends here. The XS Power D4800 is the direct, drop-in replacement for the standard H6/Group 48 batteries found in modern European and high-trim domestic vehicles. While big-box replacements focus on generic starting power, the D4800 is engineered for high-density power delivery. As the modern standard for luxury and performance vehicles, the Group 48 footprint provides the necessary volume for a high-output AGM cell that can support sophisticated aftermarket audio upgrades without compromising the vehicle's factory electrical integrity.

Technical Superiority Over OEM H6 Units

Standard flooded H6 batteries typically fail under the "parasitic" load of modern vehicle electronics and high-amperage audio transients. The D4800 replaces that weakness with 3000A of Max Current and a 60Ah (C20) capacity. With 730 Cold Cranking Amps (CCA) and 815 Cranking Amps (CA), it provides more than enough cold-start reliability for extreme climates, but the real advantage is the 120-minute reserve capacity. This reserve provides the "buffer" required to absorb massive transients from an amplifier rack without the voltage sag that causes light flickering or electronic interference in sensitive modern car systems.

The 2000W / 3000W Dual-Disclosure

Understanding the difference between primary and secondary wattage is key for any Group 48 installation. The D4800 is rated for 2000W of primary power, meaning it can continuously support a steady musical load at that level. However, it excels in the "Secondary" peak musical rating of 3000W. This secondary rating reflects the battery's ability to handle the instantaneous "burst" transients of a bass drop or a high-dynamic-range track. At a standard 14.4V charging voltage, the D4800 acts as a massive capacitor, discharging and recharging at high speeds to ensure your amps never starve for current during the most demanding peaks of your music.

Fitment and Group 48 Integration

The D4800 is a Left-Polarity (L) unit that adheres strictly to the BCI Group 48 (DIN H6) dimensions. This ensures that factory hold-down brackets, thermal sleeves, and vent tubes align perfectly without the need for custom fabrication or "shimming" the battery tray. For installers, this means an OEM-quality fit with XS Power's signature high-output AGM chemistry. It is the correct foundation for any electrical system that needs to support a 3000W peak musical load while maintaining the daily-driver reliability required for a modern luxury or performance vehicle.

Who Should Install the D4800

The D4800 is the ideal upgrade for owners of Audi, BMW, Volkswagen, and late-model Ford or GM vehicles that utilize the H6 tray. It is specifically profiled for the enthusiast who has added a mid-sized amplifier system (up to 3000W peak) and wants to prevent the premature failure common with stock lead-acid batteries. If your build prioritizes a "stealth" factory-look installation with aftermarket-level power delivery, the D4800 is the most efficient drop-in solution available.

Translation missing: en.product.general.view_technical_specs